High‑Performance Comprehensive Solar Photovoltaic Power Generation Training Bench PV Simulation Experiment Educational Teaching Equipment

Primarily intended for research and training on solar power generation for vocational high schools, universities, graduate students, and corporate technicians.

The solar panels are assembled in an array format, primarily consisting of four (or more) small solar panels. These panels can be connected in parallel or in series, providing either high current or high voltage solar panel networking options.

Maximum Output Power: 4 x 10W

Open-Circuit Voltage: 21.24V (Parallel), 4 x 21.24V (Series)

Short-Circuit Current: 4 x 0.75A (Parallel), 0.57A (Series)

Range: 0-225Lx, 200-2250Lx, 2000-22500Lx, and 20K-225KLx (225000Lx), with automatic range switching.

Two DC voltmeters: (0-200V) and two DC ammeters (2A)

One AC voltmeter: (0-500V) and one AC ammeter (5A)

Temperature and hygrometer: Temperature measurement range: -50°C to +70°C, Humidity measurement range: 20% to 90%

Includes a lux meter, thermometer, and hygrometer, along with a single-chip clock system for time display

Motherboard: Intel M11 industrial control solid-state energy-saving motherboard

Memory: 1GB DDR3 1333 ultra-high-speed memory, supports 1333/1066MHz memory, up to 8GB

Hard Drive: 24GB SSD

Graphics Card: Integrated Intel HD Graphics core graphics card, providing VGA, LVDS, and dual HDMI display outputs. LVDS supports dual-channel 24-bit, supporting single display, dual-display duplication, and dual-display expansion.

Sound Card: Integrated ALC662 6-channel high-definition audio controller

Network Card: Integrated one RTL Gigabit network card, supporting Wake-on-LAN and PXE.

Power supply: External power supply (100V to 220V wide voltage range, universal)

Display: 13-inch LED industrial control screen, resolution: 1024*600

Ports: 4 USB 2.0 ports, two of which support USB 3.0 (customizable)

1 HDMI port, 1 VGA port, 1 RJ-45 network port, 1 Line out (green), 1 Mic (red)

2 COM ports, 1 12V DC_JACK input

System Status:

Solar controller (with alarm function):

• Display of input voltage, current, power data and dynamic curve display
• Display of output voltage, current, power data and dynamic curve display
• Battery: Display of voltage data and dynamic curve display

Category: sine wave inverter

Input voltage: DC9.7-14.4V,

Output voltage: AC220±5% and 5V

Undervoltage protection: 9.6V±0.2V

Overvoltage protection: 14.4V±0.2V

Output power: 100W

Peak power: 300W

Output waveform: sine wave

Controller related parameters: (12V/24V automatic switching system)

1. With full automatic control such as overcharge, over-discharge, electronic short circuit, overload protection, unique anti-reverse connection protection
2. Adopts series PWM charging main circuit, which reduces the voltage loss of the charging circuit by nearly half compared with the charging circuit using diodes, and the charging efficiency is higher than that of non-PWM 3%-6% higher, increasing the battery life; the over-discharge recovery charging, normal direct charging, and floating charge automatic control mode make the system have a longer service life; it also has high-precision temperature compensation
3. Undervoltage voltage: 12.0V; ×2/24V
4. Overvoltage protection: 17V; ×2/24V
5. Overload and short-circuit protection: 1.25 times the rated current for 60 seconds, 1.5 times the rated current for 5 seconds when the overload protection is activated, ≥3 times the rated current when the short-circuit protection is activated
6. Total rated charging current: 10A
7. Float charge: 13.6V; ×2/24V; (maintenance time: until the charging return voltage is reduced)
8. Control mode: charging is PWM Pulse Width Modulation

Controller Main Functions:

• Solar Panel Working Status (Undervoltage, Operation)
• Battery Working Status (Overcharge, Overdischarge, Charging)
• Battery Level Indicator (25%, 50%, 75%, 100%)
• Output Mode Setting (Normal, Light Control, Time Control)
• Battery Charging Current, Voltage Monitoring.

1. Five groups of DC12V loads. (3 groups of inductive loads, 2 groups of resistive loads)
   1. Inductive loads include: 12V DC fan, 12V DC motor, 12V buzzer
   2. Resistive loads include: 12V traffic light, 3W LED light
2. Four groups of AC220V loads. (1 set of inductive loads, 3 sets of resistive loads)
   1. Inductive loads include: 220V DC fan
   2. Resistive loads: 220V traffic lights, 220V 3W LED lights, 220V 28W LED lights
3. Adjustable regulated power supply (0-12V, 0-1A). It can be upgraded to an adjustable constant voltage and constant current regulated power supply of 0-30V, 0-5A as required.
4. The technical parameters of the adjustable resistor box are as follows:
   1. Resistance range: 10 ohms - 99.99K
   2. Error range: ±1%
5. USB interface voltage output: It can provide 5V DC regulated power supply for electronic devices.

1. Solar Panel Open Circuit Voltage Test
2. Solar Panel Short Circuit Current Test
3. Solar Panel I-V Characteristic Test
4. Solar Panel Maximum Output Power Calculation
5. Solar Panel Fill Factor Calculation
6. Solar Panel Conversion Efficiency Measurement
7. Open Circuit Voltage vs. Relative Light Intensity Functional Relationship
8. Short Circuit Current vs. Relative Light Intensity Functional Relationship

1. Solar Battery Charging Control Experiment
2. Controller Charge and Discharge Protection Experiment
3. Battery Voltage and Current Measurement Experiment
4. Battery Capacity Estimation Experiment
5. Battery Current Inflow and Output Control Experiment
6. Controller Ambient Temperature Measurement Experiment
7. Controller Light-Controlled and Time-Controlled Output Experiment

1. Solar AC and DC Fan Experiment
2. Solar Street Light Experiment
3. Solar Warning Light Experiment
4. Solar Charger Experiment
5. Solar Variable Impedance Load Experiment

1. Maximum Output Current Experiment
2. Maximum Output Power Experiment
3. Current Characteristics at Different Constant Voltage Conditions
4. Voltage Characteristics at Different Constant Current Conditions

1. Inverter Operating Principle Analysis Experiment
2. Output Voltage and Current Measurement Experiment
3. Maximum Output Power Estimation Experiment
4. Overload and Short-Circuit Protection Demonstration Experiment
5. Input Voltage Reverse Polarity Demonstration Experiment
6. Input Voltage Range Measurement Experiment
7. Conversion Efficiency Calculation Experiment